Financial Feasibility Modeling of Robotic FRP Fabrication for Large-Scale Infrastructure Projects
Keywords:
robotic fabrication; fiber-reinforced polymer; infrastructure finance; construction automation; break-even analysis; risk-adjusted appraisalAbstract
Robotic fabrication of fiber-reinforced polymer (FRP) systems offers a potential route to more consistent, safer, and faster confinement and strengthening of large infrastructure assets, yet capital-intensive automation is often appraised with simplified unit-cost comparisons that neglect utilization, rework, learning, and project-specific risk. This manuscript develops a financial feasibility model for robotic FRP fabrication in large-scale infrastructure projects. The model treats the robotic option as an incremental alternative to conventional manual layup and links process mechanics, including available machine hours, task time, availability, handling and consolidation, and defect probability, to periodic cash flows. It formulates net present value, unit-cost differentials, break-even output, expected rework cost, learning-curve effects, and a risk-adjusted acceptance rule. The formulation distinguishes fixed deployment costs from variable process savings and shows why the same robotic system can be financially attractive on a long-duration, high-volume project and unattractive on a short, fragmented one. It also clarifies how quality variation, schedule delay, material waste, and financing terms alter the ranking of alternatives, and why contingency should be modeled explicitly rather than buried in a single discount rate. The contribution is an analytically transparent appraisal structure that can be populated with project-specific engineering and financial parameters without embedding untested empirical assumptions. The model provides decision support for owners, contractors, and technology providers evaluating whether robotic FRP fabrication should be mobilized, rented, shared across projects, or rejected in favor of conventional methods.
References
1. Bakis, C. E., Bank, L. C., Brown, V. L., Cosenza, E., Davalos, J. F., Lesko, J. J., Machida, A., Rizkalla, S. H., & Triantafillou, T. C. (2002). Fiber-reinforced polymer composites for construction—State-of-the-art review. Journal of Composites for Construction, 6(2), 73–87. https://doi.org/10.1061/(ASCE)1090-0268(2002)6:2(73)
2. Hollaway, L. C., & Teng, J. G. (Eds.). (2008). Strengthening and rehabilitation of civil infrastructures using fibre-reinforced polymer (FRP) composites. Woodhead Publishing.
3. Bock, T. (2007). Construction robotics. Autonomous Robots, 22(3), 201–209. https://doi.org/10.1007/s10514-006-9008-5
4. Warszawski, A., & Navon, R. (1998). Implementation of robotics in building: Current status and future prospects. Journal of Construction Engineering and Management, 124(1), 31–41. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:1(31)
5. de Neufville, R., & Scholtes, S. (2011). Flexibility in engineering design. MIT Press.
6. Touran, A. (2003). Probabilistic model for cost contingency. Journal of Construction Engineering and Management, 129(3), 280–284. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:3(280)
7. Kumar, B. B. M., Hsueh, Y. C., Xin, Z., & Luo, D. (2021, July). Process and evaluation of automated robotic fabrication system for in-situ structure confinement. In The International Conference on Computational Design and Robotic Fabrication (pp. 368-379). Singapore: Springer Singapore.
8. Bock, T., & Linner, T. (2016). Construction robots: Elementary technologies and single-task construction robots. Cambridge University Press.
9. Advani, S. G., & Sozer, E. M. (2002). Process modeling in composites manufacturing. Marcel Dekker.
10. Strong, A. B. (2008). Fundamentals of composites manufacturing: Materials, methods and applications (2nd ed.). Society of Manufacturing Engineers.
11. Park, C. S. (2013). Fundamentals of engineering economics (3rd ed.). Pearson.
12. Blank, L., & Tarquin, A. (2018). Engineering economy (8th ed.). McGraw-Hill Education.
13. Wright, T. P. (1936). Factors affecting the cost of airplanes. Journal of the Aeronautical Sciences, 3(4), 122–128. https://doi.org/10.2514/8.155
14. Akintoye, A. S., & MacLeod, M. J. (1997). Risk analysis and management in construction. International Journal of Project Management, 15(1), 31–38. https://doi.org/10.1016/S0263-7863(96)00035-1
15. Carmichael, D. G. (2014). Infrastructure investment: An engineering perspective. CRC Press.
16. Son, H., Kim, C., Kim, H., & Han, S. (2010). Trend analysis of research and development on automation and robotics technology in the construction industry. KSCE Journal of Civil Engineering, 14(2), 131–139. https://doi.org/10.1007/s12205-010-0131-7
17. Hollaway, L. C. (2010). A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties. Construction and Building Materials, 24(12), 2419–2445. https://doi.org/10.1016/j.conbuildmat.2010.04.062
18. Bank, L. C. (2006). Composites for construction: Structural design with FRP materials. John Wiley & Sons.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Global Financial Analytics Research Review

This work is licensed under a Creative Commons Attribution 4.0 International License.
This article is published under the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.



